Next steps
1. Install the power button.
2. Install the system board.
NOTE: System board can be removed with the heat sink, and USB board attached.
3. Install the speakers.
4. Install the power-adapter port.
5. Install the memory module.
6. Install the wireless card.
7. Install the solid-state drive 2.
8. Install the solid-state drive 1.
9. Install the display assembly.
10. Install the rear cover.
11. Install the touchpad.
12. Install the battery.
13. Install the base cover.
14. Follow the procedure in After working inside your computer.
54
Removing and installing components
To Next Page
Loading...
