What to do if my Dell P135G002 battery is swollen?
If you notice that the battery in your Dell Laptop is swollen, discontinue using the laptop. To discharge the battery, disconnect the AC adapter and allow the battery to drain completely.
What to do if my Dell P135G002 battery swelling impacts performance?
If a swollen battery is impacting the performance of your Dell Laptop, replace the swollen battery and dispose of it properly.
What to do if no memory/RAM is detected in my Dell P135G002?
If your Dell Laptop isn't detecting any memory or RAM, make sure the memory module is properly installed.
What to do if my Dell P135G002 has memory/RAM failure?
If you are experiencing memory or RAM failure in your Dell Laptop, try resetting and swapping the memory modules among the slots.
What to do if my Dell Laptop has invalid memory installed?
If your Dell Laptop indicates that invalid memory is installed, try resetting and swapping the memory modules among the slots.
What to do if my Dell P135G002 detects flash corruption by SBIOS?
If SBIOS detects flash corruption in your Dell Laptop, press and hold the power button for over 25 seconds to perform an RTC reset.
What to do if my Dell P135G002 has a system board/chipset error?
If your Dell Laptop is showing a system board or chipset error, you should replace the system board.
What to do if my Dell P135G002 has a power rail failure?
If your Dell Laptop experiences a power rail failure, you should replace the system board.
What to do if my Dell P135G002 Laptop has an unrecoverable SPI Flash Failure?
If your Dell Laptop experiences an unrecoverable SPI Flash Failure, you should replace the system board.
What to do if my Dell P135G002 Laptop LCD failure (SBIOS message)?
If your Dell Laptop displays an LCD failure message from SBIOS, you should replace the LCD module.
To Next Page
General
