28 │ Operating the monitor
Setting up display resolution on your monitor
Setting display resolution to 1920 x 1080
For best performance, set the display resolution to 1920 x 1080 pixels by performing the
following steps:
In Windows 10 or Windows 11:
1. Right-click on the desktop and click Display settings.
2. If you have more than one monitor connected, ensure to select P1424H.
3. Click the Display Resolution dropdown list and select 1920 x 1080.
4. Click Keep changes.
If you do not see 1920 x 1080 as an option, you must update your graphics driver to the latest
version. Depending on your computer, complete one of the following procedures:
If you have a Dell desktop or laptop:
• Go to www.dell.com/support, enter your service tag, and download the latest driver for
your graphics card.
If you are using a non-Dell computer (laptop or desktop):
• Go to the support site for your non-Dell computer and download the latest graphic card
drivers.
• Go to the graphics card’s website and download the latest graphic card drivers.
To Next Page
Loading...
