Dell P2217 User Manual (English)

To Next Page

Product Announcement:

This product is certificated to meet RoHS

Directive and Lead-Free produced definition.

Using approved critical components only is

recommended when the situation to replace

defective parts. Vender assumes no liability

express or implied, arising out of any unauthorized

modification of design or replacing non-RoHS

parts. Service providers assume all liability.

Qualified Repairability:

Proper service and repair is important to the safe,

reliable operation of all series products. The

service providers recommended by vender should

be aware of notices listed in this service manual in

order to minimize the risk of personal injury when

perform service procedures. Furthermore, the

possible existed improper repairing method may

damage equipment or products. It is recommended

that service engineers should have repairing

knowledge, experience, as well as appropriate

product training per new model before performing

the service procedures.

NOTICE:

! To avoid electrical shocks, the products should be

connected to an authorized power cord, and turn

off the master power switch each time before

removing the AC power cord.

! To prevent the product away from water or

expose in extremely high humility environment.

! To ensure the continued reliability of this

product, use only original manufacturer’s

specified parts.

! To ensure following safety repairing behavior, put

the replaced part on the components side of

PWBA, not solder side.

! To ensure using a proper screwdriver, follow the

torque and force listed in assembly and

disassembly procedures to unscrew screws.

! Using Lead-Free solder to well mounted the

parts.

! The fusion point of Lead-Free solder requested in

the degree of 220°C.

1. Important Safety Notice

Need help?

Do you have a question about the Dell P2217 and is the answer not in the manual?

Dell P2217 Specifications

General

3D	No
HD type	WSXGA+
Panel type	TN
Color gamut	84 %
Pixel pitch	0.282 x 0.282 mm
Screen shape	Flat
Pixel density	90 ppi
Backlight type	LED
Display surface	Matt
Display diagonal	22 \
Display resolution	1680 x 1050 pixels
Display technology	LCD
Native aspect ratio	16:10
Vertical scan range	56 - 76 Hz
Horizontal scan range	30 - 83 kHz
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i
Viewable size diagonal	558.68 mm
Viewable size, vertical	296.1 mm
Viewing angle, vertical	170 °
Contrast ratio (dynamic)	4000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	473.76 mm
Viewing angle, horizontal	160 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1680 x 1050 (WSXGA+)
On/off switch	-
Pivot angle	0 - 90 °
Tilt angle range	-5 - 21 °
Panel mounting interface	100 x 100 mm
Certification	RoHS
Product color	Black
Market positioning	Business
Compliance industry standards	TCO
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
HDMI version	1.4
DisplayPort version	1.2
Number of upstream ports	1
USB Type-A downstream ports quantity	4
Input current	1.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	37 W
Power consumption (standby)	0.2 W
Power consumption (typical)	13.3 W
Power consumption (PowerSave)	15.2 W
Operating altitude	0 - 5000 m
Non-operating altitude	5000 - 12191 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	EPEAT Gold, ENERGY STAR
Package depth	550.93 mm
Package width	378.97 mm
Package height	165.1 mm
Package weight	7030 g
Harmonized System (HS) code	85285210

Weight and Dimensions

Bezel width (top)	16.8 mm
Bezel width (side)	14.8 mm
Depth (with stand)	180 mm
Width (with stand)	503.4 mm
Height (with stand)	330.4 mm
Weight (with stand)	3000 g
Bezel width (bottom)	17.5 mm
Depth (without stand)	50.3 mm
Height (without stand)	497.4 mm
Weight (without stand)	- g