Dell P2314Ht - OSD Warning Messages

42  Operating the Monitor Operating the Monitor  43
If you press any button other than the power button one of the following
messages will appear depending on the selected input:
If either VGA or DVI-D or DP input is selected and both VGA and DVI-D and
DP cables are not connected, a floating dialog box as shown below appears.
or
or
See Solving Problems for more information.
OSD Warning Messages
When the monitor does not support a particular resolution mode you will
see the following message:
This means that the monitor cannot synchronize with the signal that it is
receiving from the computer. See Monitor Specifications for the Horizontal
and Verticalfrequency ranges addressable by this monitor. Recommended
mode is 1920 x 1080.
YouwillseethefollowingmessagebeforetheDDC/CIfunctionisdisabled.
When monitor enters Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD