42 | Operating the Monitor
When the monitor does not support a particular resolution mode, you will see the
following message:
or
This means that the monitor cannot synchronize with the signal that it is receiving from
the computer. See
Monitor Specifications
for the Horizontal and Vertical frequency
ranges addressable by this monitor. Recommended mode is 2560 x 1440 (for HDMI/
DisplayPort) or 2048 x 1152 (for VGA).
You will see the following message before the DDC/CI function is disabled:
When the monitor enters the Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the
OSD
.
To Next Page
Loading...
