About Your Monitor | 9
Back View
Back view with monitor stand
Label Description Use
1 VESA mounting holes
(100 mm x 100 mm -
behind attached VESA
Cover)
Wall mount monitor using VESA-compatible wall
mount kit (100 mm x 100 mm).
2 Regulatory label Lists the regulatory approvals.
3 Stand release button Releases stand from monitor.
4 Security lock slot Secures monitor with security lock (security lock
not included).
5 Barcode serial number
label
Refer to this label if you need to contact Dell for
technical support.
6 Dell Soundbar mounting
slots
Attaches the optional Dell Soundbar.
7 Cable management slot Use to organize cables by placing them through
the slot.
8 USB downstream port Connect your USB device. You can only use this
connector after you have connected the USB cable
to the computer and USB upstream connector on
the monitor.
To Next Page
Loading...
