Dell P2421 - Connecting the USB 3.0 Cable; Organizing Your Cables

Setting up the monitor  │  33
Connecting the USB 3.0 cable
After you have completed connecting the VGA/DisplayPort/HDMI/DVI cable,
fo
llow the procedures below to connect the USB 3.0 cable to the computer and
complete your monitor setup:
1. Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB
3.0 port on your computer. (See Bottom view for details.)
2. Conne
ct the USB 3.0 peripherals to the downstream USB 3.0 ports on the
monitor.
3. Pl
ug the power cables for your computer and monitor into a nearby outlet.
NOTE: Use the cable slot on the monitor stand to organize the cables.
4. T
urn On the monitor and the computer.
If your monitor displays an image, instal lation is complete. If it does not display
an image
, see Universal Serial Bus (USB) specific problems.
Organizing your cables
After attaching all necessary cables to your monitor and computer, (See
Connecting your monitor for cable attachment,) organize all cables as shown
above.