Operating the monitor │ 71
Input Source Select between the different video signals that may be
connected to your monitor.
USB-C 90W
Select US
B-C 90W when you are using the USB
Type-C upstream port. Press the joystick to confirm the
se
lection.
DP Select DP whe
n you are using the DisplayPort (DP)
connector. Press the joystick to confirm the selection.
HDMI Select HDM
I when you are using the HDMI connector.
Press the joystick to confirm the selection.
Rename Inputs Allows you to specify a preset input name for the
se
lected input source. The preset options are PC, PC 1,
PC 2, La
ptop, Laptop 1, and Laptop 2. The default
setting is Off.
NOTE: When y
ou perform a rename for the USB-C
(90W) input, the wattage value remains after the
specified option, e.g., PC 1 (90W).
NOTE: It is no
t applicable for the input names shown in
the warning messages and Display Info.
Auto Select Automatically scans for available input sources. The
de
fault is On. Press the joystick to confirm the
selection.
To Next Page
Loading...
