28 │ Setting up the monitor
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
NOTE: Dell monitors are designed to work optimally with Dell supplied inbox
cables. Dell does not guarantee the video quality and performance when
using non-Dell cables.
NOTE: Route the cables through the cable-management slot before
connecting them.
NOTE: Do not connect all cables to the computer at the same time.
NOTE: The graphics are used for the purpose of illustration only.
Appearance of the computer may vary.
To connect your monitor to the computer:
1. Turn Off your computer and disconnect the power cable.
2. Connect the DisplayPort, HDMI, or Type-C cable from your monitor to the
computer.
3. Switch on your monitor.
4. Select the correct input source at monitor OSD Menu and turn on your
computer.
Connecting the HDMI cable (optional)
HDMI
HDMI
To Next Page
