Dell P72G - Hard drive

Installing optional M.2 SSD
Steps
1. Insert the SSD clip into the slot on the computer.
2. Replace the M2*3 screw to secure the SSD clip to the computer.
3. Insert the SSD into the connector on the computer.
4. Place the Mylar shield over the SSD.
5. Install the:
a. battery
b. base cover
6. Follow the procedure in After working inside your computer.
Hard drive
Removing hard drive assembly
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
3. To remove the hard drive assembly:
Removing and installing components
23