Dell P72G - eDP cable

To Next Page

To Previous Page

eDP cable

Removing eDP cable

Steps

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a. base cover

b. battery

c. WLAN card

d. WWAN card (optional)

e. display hinge cover

f. display assembly

g. display bezel

h. hinge cover

i. display panel

3. Disconnect the eDP cable from the camera.

4. Peel the eDP cable from the adhesive to remove it from the display.

Installing eDP cable

Steps

1. Affix the eDP cable to the display panel and connect to the camera.

2. Install the:

a. display panel

Removing and installing components

Other manuals for Dell P72G