Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or
4.x.x.x or 5.x.x.x to 5.1.9.3 Firmware
Page 20
CKCKCK
5. Select 5 - Display operational code vital product data
[Boot Menu] 5
The following image is in the Flash File System:
File Name......................................image1
CRC............................................0x7289 (29321)
Target Device..................................0x00508548
Size...........................................0xc176cc (12678860)
Number of Components...........................3
Operational Code Size..........................0xa739ac (10959276)
Operational Code Offset........................0x74 (116)
Operational Code FLASH flag....................1
Operational Code CRC...........................0xF71A
Operational Compression flag...................2 (lzma)
Boot Code Version..............................1
Boot Code Size.................................0x100000 (1048576)
Boot Code Offset...............................0xa73a20 (10959392)
Boot Code FLASH flag...........................0
Boot Code CRC..................................0x4128
VPD - rel A ver 1 maint_lvl 0 build_num 15
Timestamp - Thu May 19 15:25:41 2011
File - PC7000_M6348v5.1.9.3.opr
6. Select 7 – Update Boot Code from the menu
[Boot Menu] 7
Do you wish to update Boot Code(y/n)y
Validating image1....OK
Extracting boot code from image...CRC valid
Erasing Boot Flash.....Done.
Wrote 0x10000 bytes.
Wrote 0x20000 bytes.
Wrote 0x30000 bytes.
Wrote 0x40000 bytes.
Wrote 0x50000 bytes.
Wrote 0x60000 bytes.
Wrote 0x70000 bytes.
Wrote 0x80000 bytes.
Wrote 0x90000 bytes.
Wrote 0xa0000 bytes.
Wrote 0xb0000 bytes.
Wrote 0xc0000 bytes.
Wrote 0xd0000 bytes.
Wrote 0xe0000 bytes.
Wrote 0xf0000 bytes.
Wrote 0x100000 bytes.
Validating Flash.....Passed
Flash update completed.
7. Select 9 – Reset the System
[Boot Menu] 9
To Next Page
Loading...
