4 SCG1008 PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs
3.12 Configure port channel for LAG .................................................................................................................................... 13
3.13 Configure SFP+ ports for LAG (M8024-k) ................................................................................................................... 13
3.14 Configure SFP+ ports for LAG (M8024) .......................................................................................................................14
3.15 Save configuration ............................................................................................................................................................14
3.16 Configure additional switch ............................................................................................................................................14
4 Optional virtual stack configuration for 8024 and 8024F ................................................................................................... 15
4.1 Check firmware version ................................................................................................................................................... 15
4.2 Delete startup configuration ........................................................................................................................................... 15
4.3 Configure virtual stack ports (switch 1) ........................................................................................................................16
4.4 Save configuration ............................................................................................................................................................16
4.5 Prepare the first switch for stack membership: ..........................................................................................................16
4.6 Configure virtual stack ports (switch 2) ........................................................................................................................16
4.7 Save configuration (switch 2).......................................................................................................................................... 17
4.8 Final configuration ............................................................................................................................................................ 17
4.9 Disable DCB ........................................................................................................................................................................ 17
4.10 Configure out of band (OOB) management port ..................................................................................................... 18
4.11 Configure login credentials ............................................................................................................................................ 18
4.12 Configure Jumbo Frames ............................................................................................................................................... 18
4.13 Configure spanning tree portfast on edge ports ....................................................................................................... 18
4.14 Enable flow control .......................................................................................................................................................... 18
4.15 Save configuration ............................................................................................................................................................19
Additional resources .......................................................................................................................................................................... 20
To Next Page
Loading...
