Stacking Dell PowerConnect Switches: 8132, 8132F, 8164, 8164F
33
To find the firmware versions the stack members are using, go to System > File Management > Active
Images.
Each member of the stack will be updated with the latest firmware simply by updating the Master
switch. The screenshot below demonstrate how to copy the firmware to the Master using a TFTP
server. The stack needs access to a TFTP server on the network and the firmware file needs to be
present in the download folder of the TFTP server.
From the System > File Management > File Download page, select the appropriate settings. The most
common settings are shown here.
To Next Page
Loading...
