Dell PowerEdge 2650 Service Manual

Dell™PowerEdge™2650SystemsServiceManual
System Overview
Basic Troubleshooting
Indicators, Codes, and Messages
Removing and Replacing Parts
Jumpers and Connectors
Using the System Setup Program
Notes, Notices, and Cautions
Information in this document is subject to change without notice.
©2002DellComputerCorporation.Allrightsreserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, PowerEdge, and Dell OpenManage are trademarks of Dell Computer Corporation; Intel is a registered trademark and Xeon is a
trademark of Intel Corporation; Microsoft, MS-DOS, Windows NT, and Windows are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation
disclaims any proprietary interest in trademarks and trade names other than its own.
Initial release: 24 Apr 2002
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Dell PowerEdge 2650 Specifications

General

Processor	Intel Xeon
Number of Processors	Up to 2
Hard Drives	Up to 6 x 1" Ultra320 SCSI hard drives
RAID Support	PERC 4/Di, PERC 4/SC
Network Interface	Integrated dual Gigabit Ethernet
Power Supply	Dual redundant
Operating System Support	Microsoft Windows Server, Red Hat Linux
Form Factor	2U Rack