Dell PowerEdge 2650 - Page 28

14 Dell PowerEdge 2x50 and PowerApp 200 Systems Rack Installation Guide
4. Attach the input/output (I/O) cables to their respective expansion cards on the
back of the system.
5. Install the strain-relief bracket to the back of the system (see Figure 12):
a. Thread the I/O cables you connected in step 4 through the slots of the strain-
relief bracket.
b. Insert the ends of the four long portions of the strain-relief bracket into the
four matching holes beside the hinge bracket.
c. Secure the captive thumbscrew to the back of the system.
)LJXUH$WWDFKLQJWKH6WUDLQ5HOLHI%UDFNHW
6. Connect the remaining cables to the system.
For details, see your systems Installation and Troubleshooting Guide or the
Users Guide.
bracket inserted
into four holes
strain-relief
bracket
captive
thumbscrew
Velcro strap
cables to
expansion
cards