Dell POWEREDGE 4300 - Interior Support Panel

Removing and Replacing Parts 4-29
,QWHULRU6XSSRUW3DQHO
)LJXUH,QWHULRU6XSSRUW3DQHO5HPRYDO
To access the microprocessors or the memory module, you must remove the
interior support panel as follows:
1. Loosen the thumbscrews on the left side of the panel (see Figure 4-24).
2. Rotate the panel outward slightly, and lift the hinge side of the panel to
clear the tabs from the hinge slot.
screws (2)
support panel