Principled Technologies, Inc. 10
Dell PowerEdge C6220 and CentOS 6.2: A LAMP Reference
Architecture
10. If a warning for device initialization appears, select Yes, discard any data.
11. At the Name the Computer screen, type the host name, and click Configure
Network.
12. At the Network Connections screen, select the server’s main or
management network interface, and click Edit.
13. At the Editing network interface screen, check Connect Automatically.
14. On the same screen, Select the IPv4 Settings tab, change the Method to
Manual, and click Add.
To Next Page
Loading...
