Dell PowerEdge C6220 - Appendix C - LSI Megaraid SAS 9265-8 I Storage Configuration

Principled Technologies, Inc. 19
Dell PowerEdge C6220 and CentOS 6.2: A LAMP Reference
Architecture
APPENDIX C – LSI MEGARAID SAS 9265-8I STORAGE CONFIGURATION
Below, we provide the detailed instructions for creating one RAID6 virtual disk using the LSI MegaRAID SAS 9265-8i RAID
controller and the six 900GB internal hard drives assigned to the server.
1. Connect to the server console.
2. Boot the server and press Ctrl-H on the controller screen to enter the device’s graphical interface.
3. On the Adapter Selection screen, select the LSI MegaRAID SAS 9265-8i adaptor and click Start.
4. On the MegaRAID BIOS Home screen, click on Configuration Wizard.