Figure 11. Removing and installing a PCIe mezzanine card
1. screw hole on SSD cage (2) 2. external storage connector (2)
3. PCIe mezzanine bridge card 4. Screw (2)
5. PCIe mezzanine card 6. SSD cage
Next steps
1. Install the PCIe mezzanine card.
2. Install the SSD cage.
3. If applicable, reconnect the disconnected storage devices.
4. If applicable, reconnect the disconnected USB devices.
5. Follow the procedure listed in After working inside your system.
Related Links
Removing the SSD cage
Installing the PCIe mezzanine card
Installing the SSD cage
49
To Next Page
Loading...
