Figure 28. Screw location on the system board
1. Hex nut screw 4 mm 2. Hex nut screw 5 mm (2)
3. screw (4) 4. system board holder
Figure 29. Removing and installing the system board
1. system board holder 2. system board
Next steps
1. Install the system board.
2. Follow the procedure listed in After working inside your system.
Related Links
Removing a processor
Removing memory modules
Removing the cooling shroud
Removing an SSD carrier
Removing the SSD backplane
Removing the SSD cage
Removing the PCIe mezzanine card
Removing the LOM riser card
Installing the system board
82
To Next Page
Loading...
