Dell PowerEdge M620 - Installing the Blades; Connecting the CMC and Ikvm Modules

Installing The Blades
Figure 2. Installing a Blade
Beginning at the top, slide the blades into the enclosure from left to right. When the
blade is securely installed, the handle returns to the closed position.
Connecting The CMC And iKVM Modules
Figure 3. Connecting The Modules
Connect the serial cable and network cable(s) from the management system to the CMC
module. If a second, optional CMC module is installed, connect it as well.
Connect the keyboard, mouse, and monitor to the optional iKVM module.
4