Need help?Do you have a question about the Dell EMC PowerEdge MX740c and is the answer not in the manual?
General| Max Processors | 2 |
|---|---|
| Form Factor | Modular |
| Processor | Up to 2nd Generation Intel Xeon Scalable processors |
| Storage | Up to 6 x 2.5" SAS/SATA (HDD/SSD) |
| RAID Support | HBA330 |
| Network Options | 2 x 25GbE |
| Management | iDRAC9 with Lifecycle Controller |
Identifies front panel ports, buttons, and indicators on the server sled.
Details internal components and hot-swappable indicators within the server.
Explains how to find the system's unique service tag for identification.
Describes the information found on the system information label.
Step-by-step guide for unpacking and installing the system into the enclosure.
Information on configuring the Integrated Dell Remote Access Controller for management.
Resources and methods for installing the operating system on the system.
Procedures for downloading necessary firmware and drivers from Dell.
Critical safety precautions to follow before and during component servicing.
Guidelines for preparing the system before and steps after component servicing.
Procedures for removing and installing the compute sled from/into the enclosure.
Instructions for removing and installing the system cover.
Instructions for removing and installing the air shroud.
Procedures for removing and installing drive blanks.
Procedures for removing and installing drive carriers.
Instructions for removing and installing a drive from/into its carrier.
Procedures for removing and installing the drive backplane.
Diagrams illustrating cable routing for various configurations.
Procedures for removing and installing the drive cage.
Procedures for removing and installing the battery backup unit.
Instructions for removing and installing the control panel.
Guidelines and procedures for installing and configuring system memory modules.
Steps for removing and installing the processor and its heat sink.
Procedures for removing and installing the iDRAC card.
Instructions for installing and removing PERC cards.
Instructions for installing and removing the Jumbo PERC card.
Procedures for removing and installing the IDSDM card.
Instructions for removing and installing MicroSD cards.
Procedures for removing and installing the M.2 BOSS module.
Instructions for removing and installing M.2 BOSS cards.
Procedures for removing and installing Mezzanine cards.
Instructions for removing and installing Mini Mezzanine cards.
Procedures for removing and installing the mini Mezzanine card blank.
Instructions for replacing the optional internal USB memory key.
Procedures for replacing the system battery (Options A & B).
Procedures for removing and installing the system board.
Information on upgrading, removing, installing, and initializing the TPM.
Identifies and describes various connectors and jumper locations on the system board.
Details the settings and functions of specific system board jumpers.
Procedure to reset or disable system passwords using a jumper.
Explains the meaning of the power button LED status codes.
Describes the drive activity and status LED indicators on the drive carriers.
Information on system health and system ID indicator codes on the control panel.
Guidance on running system diagnostics for troubleshooting issues.
Steps and resources for contacting Dell EMC for support and service.
How to provide feedback on the documentation.
Using Quick Resource Locator (QRL) for system information and resources.
Information on using Dell EMC SupportAssist for automated technical support.
To Next Page
