Figure 77. Installing the mini Mezzanine card
5. Close the lever on the mini Mezzanine card.
Next steps
1. Follow the procedure listed in After working inside your sled on page 17.
Removing the mini Mezzanine card blank
Prerequisites
CAUTION:
To ensure proper system cooling, the mini Mezzanine blank must be installed in the mini Mezzanine
socket.
NOTE: The removal of the blank is recommended only if you intend to install a mini Mezzanine card in the socket.
1. Follow the safety guidelines listed in Safety Instructions.
2. Follow the procedure listed in Before working inside the sled.
Steps
Lift the mini Mezzanine card blank from the slot to remove it from the system.
Installing and removing system components
79
To Next Page
Loading...
