Dell POWEREDGE R515 - Power Supply Indicators; NIC Indicators; Side Views; Table 3. Power Supply Status

Dell
17
PowerEdge R515 Technical Guide
Figure 5. Back View
See the Back-Panel Features and Indicators section in the About Your System chapter of the PowerEdge R515
Hardware Owner’s Manual on Dell.com/Support for more information.
3.5 Power Supply Indicators
The PowerEdge R515 redundant power supplies have one status bi-color LED: green for AC power present
and amber for a fault as detailed in Table 3.
Table 3. Power Supply Status
LED
Power Supply Status
AC Power is not present
AC Power is present
Fault of any kind is detected
DC Power is applied to the system
↔
Redundant power supply mismatch
(when hot-plugged/swapped)
See the Power Indicator Codes section in the About Your System chapter of the PowerEdge R515 Hardware
Owner’s Manual on Dell.com/Support for more information.
3.6 NIC Indicators
See the NIC Indicator Codes section in the About Your System chapter of the PowerEdge R515 Hardware
Owner’s Manual on Dell.com/Support for more information.
3.7 Side Views
Figure 6 and Figure 7 show left and right side views of the server.
Figure 6. Left Side View