Dell POWEREDGE R710 Series - Page 25

Dell™ PowerEdge™ R710 Technical Guidebook
25
The table below shows the memory populations and the maximum frequency achievable for that
configuration.
DIMM TYPE DIMM 0 DIMM 1 DIMM 2 # OF DIMMS 800 1066 1333
UDIMM
SR 1
DR 1
SR SR 2
SR DR 2
DR DR 2
RDIMM
SR 1
DR 1
QR 1
SR SR 2
SR DR 2
DR DR 2
QR SR 2
QR DR 2
QR QR 2
SR SR SR 3
SR SR DR 3
SR DR DR 3
DR DR DR 3
Note: For QR mixed with an SR/DR DIMM, the QR needs to be in the white DIMM connector. There is no requirement in the order of SR and DR DIMMs.
NOTE: For Quad Rank DIMMs mixed with Single- or Dual-Rank DIMMs, the QR DIMM needs to be in the slot with the white ejection tabs (the rst DIMM slot in each channel).
There is no requirement for the order of SR and DR DIMMs
Supported
Not Supported