Need help?Do you have a question about the Dell POWEREDGE R710 Series and is the answer not in the manual?
General| Form Factor | 2U Rack |
|---|---|
| Chipset | Intel 5520 |
| Network Controller | Broadcom NetXtreme II 5709c |
| Processor | Intel Xeon 5500 or 5600 series processors |
| Memory | Up to 288GB (18 DIMM slots): 1GB/2GB/4GB/8GB/16GB DDR3 |
| Storage | Up to 6 x 3.5" SAS/SATA/SSD |
| RAID Controller | PERC 6/i |
| Network | Embedded Broadcom NetXtreme II 5709c Gigabit Ethernet |
| Power Supply | Redundant 570W or 870W options |
| Management | iDRAC6 |
| Operating System Support | Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware |
Selects the boot mode (BIOS or UEFI) for operating system installation.
Configures system memory parameters, including size, type, and testing.
Configures processor-related settings like speed, cores, and virtualization.
Defines boot sequence, mode (BIOS/UEFI), and drive order.
Manages system and setup passwords, and TPM security settings.
Information and procedures for installing and removing hard drives.
Guidelines and information for installing and configuring system memory modules.
Procedures for removing and installing system processors and heat sinks.
Procedures for removing and installing the system motherboard.
Steps to diagnose and resolve issues preventing system startup.
Steps to diagnose and resolve issues related to system memory.
Procedures for diagnosing and resolving processor related issues.
To Next Page
