Dell POWEREDGE R710 Series - Removing the Cooling Shroud

Installing System Components 99
CAUTION: Never operate your system with the cooling shroud removed.
Overheating of the system can develop quickly resulting in a shutdown of the
system and the loss of data.
Removing the Cooling Shroud
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System."
3 Use the lift handles on the cooling shroud to lift the shroud out of the
system. See Figure 3-12.
Figure 3-12. Removing and Installing the Cooling Shroud
1 lift handles 2 alignment tabs
3 processors
1
2
3