Dell PowerEdge R910 - Page 11

Dell
Dell PowerEdge R910 Technical Guide 11
Feature
Details
Network Interface
Cards
Embedded NICs:
1GbE or 10Gb embedded NIC options with iSCSI offload
Broadcom
®
5709c 4-port (4 x 1GbE) Embedded NIC or
Broadcom 57711 4-port (2 x 10GbE + 2 x 1GbE) Embedded NIC + Broadcom 5709c
Optional NICs:
Broadcom 57710 Single Port 10GbE NIC, Copper CAT6 PCIe-8
Intel DA 10GbE NIC, Dual Port, Optical, PCIe-8
Intel 10GbE Single Port 10GbE NIC, Copper, PCIe-8
Broadcom NetXtreme
®
II 5709 Gigabit NIC with TOE and iSOE, Quad Port, Copper,
PCIe-4 (low-profile option)
Broadcom 5709 Dual Port 1GbE NIC with TOE PCIe-4 (low-profile option)
Broadcom 5709 Dual Port 1GbE NIC with TOE iSCSI, PCIe-4 (low-profile option)
Broadcom NetXtreme II 57711 10GbE NIC w/TOE & iSOE, Dual Port, SFP+, PCIe-8
Intel Gigabit ET NIC, Dual Port, Copper, PCIe-4 (low-profile option)
Intel Gigabit ET NIC, Quad Port, Copper, PCIe-4 (low-profile option)
Brocade
®
CNA Dual-port adapter
Emulex
®
CNA iSCSI HBA stand up adapter OCE10102-IX-D
Emulex CNA iSCSI HBA stand up adapter OCE10102-FX-D
Brocade CNA BR1020
QLogic QLE2660 FC16 Single Port, PCIe 3.0 x4
QLogic QLE2662 FC16 Dual Port, PCIe 3.0 x4
USB
Total: 5 ports, USB 2.0 compliant
2 back
2 front
1 internal
Power Supplies
Hot-plug redundant power supply units
4 x 750W (Energy Smart)
or
4 x 1100W (high-output)
Front Panel
The system control panel is located on the front of the system chassis to provide
user access to buttons, display, and I/O interfaces
LCD on front panel for error messaging
System ID
System ID switch with LED indicator at back side and LCD indication at front side
128x20 pixel LCD with controls on front panel for system ID and error messaging
System ID for PowerEdge R910 is 0x02d3
Fans
Redundant Cooling
Chassis
4U rack-mount
Chassis depth is 29.6”
Rack Support
ReadyRails™ sliding rails for tool-less mounting in 4-post racks with square or
unthreaded round holes, with support for optional tool-less cable management arm