Dell PowerEdge R910 - 13 Video; Table 14. Supported Video Modes

Dell
Dell PowerEdge R910 Technical Guide 40
13 Video
The Dell™ PowerEdge™ R910 Integrated Dell Remote Access Controller 6 (iDRAC6) incorporates an
integrated video subsystem, connected to the 32-bit PCI interface of the ICH10. This logic is based on
the Matrox
®
G200. The device only supports 2D graphics.
The video device outputs are multiplexed between the front and back video ports. If a monitor is
connected to the front video connector, it will take precedence over the rear connection, thereby
removing the display from the rear connection.
The integrated video core shares its video memory with the iDRAC6’s 128 MB DDR2 application space
memory. This memory is also used for the KVM buffer.
The R910 system supports the following 2D graphics video modes:
Table 14. Supported Video Modes
Resolution
Refresh Rate (Hz)
Color Depth
(bit)
640 x 480
60, 72, 75, 85
8, 16, 32
800 x 600
56, 60, 72, 75, 85
8, 16, 32
1024 x 768
60, 72, 75, 85
8, 16, 32
1152 x 864
75
8, 16, 32
1280 x 1024
60, 75, 85
8, 16
1280 x 1024
60
32