EasyManua.ls Logo

Dell POWEREDGE SC440 - System Features

Dell POWEREDGE SC440
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting Started With Your System 3
System Features
The major hardware and software features of your system include:
One of the following processors:
–Intel
®
Pentium
®
D
processor, E6000 sequence.
–Intel
Celeron
®
D, 300 sequence.
Intel Pentium 4, 600 sequence.
All processors are Intel Extended Memory 64 Technology (Intel EM64T) capable.
NOTE: Use the System Setup program to view processor information. See the Hardware Owner’s Manual.
A minimum of 512 MB of 533- or 667- (when available) MHz DDR II SDRAM memory, upgradable to
a maximum of 4 GB DDR II SDRAM memory by installing 512-MB or 1-GB unbuffered ECC memory
modules in the four memory module sockets on the system board; single or dual rank.
Support for the following internal hard-drive (non–hot-plug) configurations:
Up to two internal 3.5-inch SATA hard drives with an integrated SATA controller
or
Up to two internal 3.5-inch Serial-Attached SCSI (SAS) hard drives with a SAS controller card
One 3.5-inch peripheral drive bay for the optional diskette drive, and two 5.25-inch bays for the
following supported drives: CD, DVD, combination CD-RW/DVD, or tape backup device.
NOTE: DVD devices are data only.
Support for the following disk volume types: simple, spanned, stripped (RAID 0), and mirrored
(RAID 1).
Support for USB 2.0.
A chassis intrusion alert.
The system board includes the following integrated features:
Dual-channel IDE controller that supports up to two supported devices including IDE CD, DVD,
CDRW/DVD combination drive, and an IDE tape backup device.
NOTE: DVD devices are data only.
SATA controller that supports up to two cabled SATA hard drives.
Two 32-bit, 33-MHz I/O expansion card slots, one x1 lane-width PCIe expansion slot, one x4 lane-
width PCIe expansion slot, and one x8 lane-width PCIe expansion slot.
An integrated VGA-compatible video subsystem with an ATI ES1000, 33-MHz PCI video controller.
This video subsystem contains 16 MB of graphics memory with support for 2D graphics. Maximum
resolution is 1600x1200 with 65,536 colors; true-color graphics are supported in the following
resolutions: 640 x 480, 800 x 600, 1024 x 768, and 1280 x 1024.
NOTE: Your system supports integrated video only.

Other manuals for Dell POWEREDGE SC440

Related product manuals