104 Installing System Components
• I/O panel cable to the CONTROL_PANEL connector
• Processor cooling fan cable to the CPU_FAN connector
• Drive cage cooling fan cable to the HDD_FAN connector
• SATA hard-drive data cable(s) to the SATA connector(s)
• Intrusion switch cable from the INTRUSION SWITCH connector
8
Close the system. See "Closing the System" on page 47.
9
Reconnect the system to the electrical outlet, and turn on the system.
book.book Page 104 Wednesday, June 24, 2009 8:21 AM
To Next Page
Loading...
