Dell PowerEdge T410 - Boot Order; 13 Storage; Overview;Description

PowerEdge T410 Technical Guidebook
39
Dell
Category Description Bandwidth
Max
Quantity
Slot Priority
1G NICs
Intel PRO/1000 PT Server Adapter x1 4 2, 1, 3, 4
Broadcom NetXtreme II 5709 Dual Port
Ethernet PCIe Card with TOE
x4 4 2, 1, 3, 4
Broadcom NetXtreme II 5709 Dual Port
Ethernet PCIe Card with TOE and iSCSI
Offload
x4 4 2, 1, 3, 4
Intel Gigabit VT Quad Port Server Adapter x4 4 2, 1, 3, 4
12.3 Boot Order
PCI Express Lane Assignments and Scan Order in T410:
• IOH port 1, 2 (PCI Express Gen2 x4) – Broadcom BCM5716 Gigabit LOM
• IOH port 3 (PCI Express Gen2 x4) – Slot 4
• IOH port 7/8 (PCI Express Gen2 x8) – Slot 5
• IOH port 9 (PCI Express Gen2 x4) – Slot 2
• IOH port 10 (PCI Express Gen2 x4) – Slot 1
• ICH10R port1-4 (PCI Express Gen1 x4) – Slot 3
13 Storage
13.1 Overview/Description
The PowerEdge T410 supports up to six hard disk drives.
• 4x 3.5” cabled SATA from motherboard SATA connector
• 6x 3.5” cabled SAS or SATA via add-on storage controller
• 6x 3.5” hot-swap SAS or SATA via add-on storage controller
• 6x 2.5” hot-swap SAS or SATA or SSD via add-on storage controller
The 2.5” Hard Disk Drives requires hot-swap configuration with the 3.5” Hot Plug HDD Carrier tray and
the retention kit.
Customer must decide for cabled configuration or hot-swap configuration at point of purchase. This is
not an upgrade option for APOS.