Dell poweredge VRTX - Page 12

d. Hold the card by its edges, and align the card edge connector with the card connector on the
system board.
e. Insert the card edge connector into the card connector until the card is fully seated.
f. Close the expansion card latch.
g. Close the system cover.
For additional information about installing or removing the PCIe adapter card in VRTX chassis, see
Dell
PowerEdge VRTX Enclosure Owner's Manual
at Dell.com/poweredgemanuals.
Figure 3 Removing and installing Shared PERC 8 External card
1. Shared PERC 8 External card
2. Card connector on the system board
3. Expansion card latch
4. Metal standoff
5. Release tab
6. Divider unit
12 Upgrading PowerEdge VRTX to Support Shared Storage Expansion