Cabling Your Blade Cluster Hardware 41
NOTE: Figure 2-8 is for illustration purposes only. Some cluster connections are
routed internally through the PowerEdge server enclosure. The server and storage
components in your cluster configuration may vary.
Cabling PowerEdge Server Enclosures With Embedded Switch Modules to an
External Fabric
Figure 2-9 shows an example of a PowerEdge M1000e system cluster with
embedded Fibre Channel switch modules connected to an external
SAN-attached fabric.
NOTE: Figure 2-9 is for illustration only. Some cluster connections are routed
internally through the PowerEdge server enclosure. The server and storage
components in your cluster configuration may vary.
book.book Page 41 Monday, December 31, 2007 3:41 PM
To Next Page
Loading...
