Dell PowerVault MD3200 - For Linux; Configuring CIM Server

8 Installing and Uninstalling the SMI-S Provider
For Linux
The SMI-S Provider is packaged as an archive file.
To install the SMI-S Provider:
1
Move the SMI-S Provider RPM package file into the file system on the
server where you want to install SMI-S Provider.
2 Run the following command:
rpm -ivh <rpm package name>.rpm
NOTE: On SUSE Linux Enterprise Server platform, ensure that you set the
environment variables PEGASUS_HOME and LD_LIBRARY_PATH before
running any CLI from pegasus/bin directory (like cimcli or cimserver). Set the
environment variables to the following (assuming the /opt/dell as the default
install path)
export PEGASUS_HOME /opt/dell/pegasus
export LD_LIBRARY_PATH /opt/dell/pegasus/lib
To change the OpenPegasus CIMOM configuration, see "Configuring CIM
Server" on page 8.
Configuring CIM Server
Use the following commands to perform basic CIM server configuration
operations.
NOTE: You must restart the OpenPegasus server after executing any of the
following commands.
• To set an http port:
# cimconfig -s httpPort=<port> -p
• To set an https port:
# cimconfig -s httpsPort=<port> -p
• To enable or disable the http connection:
# cimconfig -s enableHttpConnection={true | false}
-p
• To enable or disable the https connection:
# cimconfig -s enableHttpsConnection={true |
false} -p
book.book Page 8 Friday, July 9, 2010 2:13 PM