Dell POWERVAULT MD3600F - Page 34

34 Cabling Your Cluster Hardware
d Connect a cable from Fibre Channel switch (Switch fabric A) to the
Fibre Channel port on the MD36
x 0f RAID controller module 0, port
In-2.
e Connect a cable from Fibre Channel switch (Switch fabric B) to the
Fibre Channel port on the MD36
x 0f RAID controller module 0, port
In-1.
f Connect a cable from Fibre Channel switch 1 (Switch fabric B) to the
Fibre Channel port on the MD36
x 0f RAID controller module 0, port
In-3.
g Connect a cable from Fibre Channel switch 1 (Switch fabric B) to the
Fibre Channel port on the MD36
x 0f RAID controller module 1, port
In-0.
h Connect a cable from Fibre Channel switch 1 (Switch fabric B) to the
Fibre Channel port on the MD36
x 0f RAID controller module 1, port
In-2.
book.book Page 34 Monday, July 25, 2011 3:18 PM