Dell PowerVault NX400 Setting Up

Setting Up Your Dell PowerVault NAS Solution (continued)
2012 - 07
4
|
Initial Confi guration
The PowerVault NAS Initial Configuration Wizard
runs when you first log on to the PowerVault
NX400 storage system.
The initial configuration tasks include:
Changing the local administrator default •
password
Selecting the system language•
Confirming the settings•
The PowerVault NAS Initial Configuration Wizard
also configures NAS specific software. After the
wizard is complete, you are prompted to reboot
the system.
5
|
System Confi guration
The Server Manager window opens
when the administrator logs on to the
system. Using
Server Manager, you
can perform the following tasks:
Initial system configuration•
Configure networking•
Change the computer name•
Specify the language and regional •
settings
Change the date and time settings•
6
|
Additional Information
Utility Share
Utility share is a Server Message Block (SMB) share preconfi gured on your system. The utility share allows you to view data either locally or remotely.
To access the utility share, type \\D<ServiceTag>\NASUtils\ where <ServiceTag> is a unique fi ve- to seven- digit alphanumeric (letter and number)
code, found on a bar-coded label affi xed to your system.
Documentation
For documentation and information updates, see support.dell.com/manuals.
Dell OpenManage Server Administration
You can monitor your system remotely using Dell Open Manage Server Administrator. To access Server Administrator, connect to the secure port,
1311, of your NAS system.
For example, type: https://D<ServiceTag>:1311 where <ServiceTag> is a unique fi ve- to seven- digit alphanumeric (letter and number) code, found
on a bar-coded label affi xed to your system.
© 2012 Dell Inc. All rights reserved.
Dell™, the DELL
logo, and PowerVault™ are trademarks of Dell Inc.

Dell PowerVault NX400 Specifications

General

Brand	Dell
Model	PowerVault NX400
Category	Storage
Language	English