Need help?Do you have a question about the Dell PowerVault TL2000 and is the answer not in the manual?
General| Number of Drives | 1 or 2 |
|---|---|
| Number of Slots | 24 |
| Type | Tape Library |
| Drive Types | LTO-4, LTO-5, LTO-6 |
| Interface | SAS, Fibre Channel |
| Dimensions | 8.68 in (22.05 cm) x 19.0 in (48.26 cm) x 30.0 in (76.2 cm) |
| Tape Drive Compatibility | LTO-4, LTO-5, LTO-6 |
| Power Supply | Redundant power supplies optional |
| Operating Temperature | 50°F to 95°F (10°C to 35°C) |
| Non-operating Temperature | -40°F to 140°F (-40°C to 60°C) |
Lists minimum firmware levels required for common library features.
Provides contact information and support options for Dell customers.
Defines danger, caution, and attention notices with accompanying symbols for safety awareness.
Outlines general safety information for all rack-mounted devices in a data center.
Describes the components and layout of the library's front panel interface.
Explains the types of Ultrium tape drives supported and their packaging as drive sleds.
Provides detailed physical, power, and operational specifications for the library.
Explains the two modes of operation for the Operator Control Panel.
Describes how to access and use the library's remote management interface via a web browser.
Guides on partitioning the library into logical units based on installed drives.
Outlines supported host interfaces (SCSI, SAS, Fibre Channel) and their characteristics.
Provides step-by-step instructions for securely installing the library into a standard 19-inch rack.
Step-by-step guide to configure the library using the web-based interface for optimal operation.
Explains how to navigate the library settings using the front panel control keys.
Provides access to static library information, such as serial number and firmware versions.
Guides on setting up network parameters for remote access and communication.
Provides steps to diagnose and resolve issues related to the library's power supply unit.
Offers guidance on diagnosing and troubleshooting issues with individual drive sleds.
Explains how to identify and handle potentially problematic tape cartridges.
Details how to remove tape cartridges from magazine slots, especially during severe mechanical problems.
Provides instructions for manually releasing magazines when standard methods fail.
Details precautions to prevent damage from static electricity when handling components.
Step-by-step procedures for safely removing, installing, or adding tape drive sleds.
Instructions for replacing the library's controller card and managing VPD data.
Outlines methods for replacing cartridge magazines in the library.
Provides detailed SCSI element addresses and physical slot mapping for 2U libraries.
Details SCSI element addresses and physical slot mapping for 4U libraries.
Lists TapeAlert flags related to drive status and recommended actions.
Details ASC/ASCQ codes associated with Sense Keys for library hardware errors.
Provides detailed sense data information for LTO Tape Drives, including ASC/ASCQ codes.
Provides steps to enable LUN support for SCSI devices in Red Hat Enterprise Linux.
Instructions to enable IPv6 support in older Windows operating systems.
Lists SNMP trap IDs and their definitions for monitoring library status events.
Provides fields to record general library configuration settings like type and serial number.
Outlines major accessibility features for the HTML documentation, like screen reader support.
Explains keyboard shortcuts for navigating the HTML documentation interface.
Defines numerical terms and abbreviations used in the document.
To Next Page