Dell PowerVault TL2000 - Configure Library: User Access Page

The Admin login has access to all library functions except Service Library →
Advance Diagnostics.
The Service login has access to all library functions including Service Library →
Advance Diagnostics.
The following elements are displayed on the User Access page.
Role The name associated with the chosen Access Level.
Note: Admin can select User, Superuser, and Admin roles. Service can
select User, Superuser, Admin, and Service roles.
Check the Disable Superuser checkbox if you do not want Superuser to
be listed on the Role listbox (i.e. prohibits Superuser login). Check the
Disable User checkbox if you do not want User to be listed on the Role
listbox (i.e. prohibits User login). Uncheck the checkbox(es) to allow
Superuser or User login.
New Password
The password must be a maximum of ten characters (A-Z, a-z, 0-9, @,
<space>, <hyphen>, <period>).
Repeat Password
Enter the New Password again.
Support name
The name of the individual within your company to contact for Web User
Interface or library support.
Note: Only one support person can be configured for the entire tape
library. The support person may or may not be one of the user,
superuser, or admin account holders.
Support phone
The phone number of the individual within your company to contact for
Web User Interface or library support.
Support email
The email address of the individual within your company to contact for
Web User Interface or library support.
Click one of the following:
v Refresh - to cancel the changes made to the screen.
Figure 5-45. Configure Library: User Access page
Chapter 5. Operations 5-53