The Ultrium 4 Full Height Tape Drives support SAS, or Fibre Channel interfaces. It
features two SFF-8088 SAS connectors, or one LC Fibre Channel connector. The
Ultrium 4 Half Height Tape Drive supports one SAS SFF-8088 connector. The
SFF-8088 SAS connectors on the Ultrium 4 tape drives are compatible with SAS-1
cables.
The Ultrium 3 Full Height Tape Drive supports LVD Ultra160, or Fibre Channel
interfaces. It features two HD68 connectors or one LC Fibre Channel connector. The
Ultrium 3 Half Height Drive supports one SAS SFF-8088 connector. The SFF-8088
SAS connectors on the Ultrium 3 tape drives are compatible with SAS-1 cables.
a77ug008
Figure 1-6. Library drive sled without ESD springs (SCSI sled shown)
a77ug202
1
Figure 1-7. Library drive sled with ESD springs [1] (SAS sled shown)
Chapter 1. Product Description 1-9
To Next Page
Loading...
