2.5-inch 1 TB 7200 RPM SATA Hard Drive
Table 40. 2.5-inch 1 TB 7200 RPM SATA Hard Drive
Capacity (GB) 1 TB HDD 7200 RPM
Dimensions (W x D x H) Approximately (2.76 in. x 3.959 in. x 0.276 in.)
Interface type and maximum speed Up to 6 Gb/s (SATA 3.0)
MTBF 550,000 hours
Logical blocks 1,953,525,168
Power source
Power consumption (reference only) Idle 0.7 W, Active 3.25 W
Environmental Operating Conditions (Non-Condensing)
Temperature range 5°C to 60°C
Relative humidity range 5% to 90%
Op shock (@ 2ms)
350 G
Environmental Non-Operating Conditions (Non-Condensing)
Temperature range -40°C to 65°C
Relative humidity range 5% to 95%
128 GB M.2 2230 PCIe Gen3x4 NVMe Class 35 Solid-State Drive
Table 41. 128 GB M.2 2230 PCIe Gen3x4 NVMe Class 35 SSD
Features Specifications
Capacity (GB) 128 GB
Dimensions (mm) (W x D x H) (22 x 80 x 2.38) mm
Interface type and Maximum
s
peed
PCle Gen3 32 Gb/s (up to 4 lanes)
Mean Time Between Failures
(MTBF)
1.4M hours
Logical Blocks 250,069,680
Power Source:
Power Consumption
(reference only)
Idle 5 mW (PS4), Active 3.5 W
Environmental Operating Conditions (Non-Condensing):
Temperature Range 0°C–70°C
Relative Humidity Range 10% to 90%
Non-Op Shock (@0.5 ms) 1,500G
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -40°C to 70°C
32 Engineering specifications