Table 31. System setup options—Integrated Devices menu (continued)
Integrated Devices
By default, Enable Camera is selected.
Audio
Enable Audio Enables or disables all integrated audio controller.
Default: ON
Enable Microphone Enables or disables microphone.
By default, Enable Microphone is selected.
Enable Internal Speaker Enables or disables internal speaker.
By default, Enable Internal Speaker is selected.
USB Configuration Enables or disables booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
By default, Enable USB Boot Support is selected.
By default, Enable External USB Ports is selected.
Miscellaneous Devices
Enable Fingerprint Reader Device Enables or disables the Fingerprint Reader Device.
By default, Enable Fingerprint Reader Device is selected.
Enable Fingerprint Reader Single Sign On Enables or disables the Fingerprint Reader Single Sign On capability.
By default, Enable Fingerprint Reader Single Sign On is selected.
Table 32. System setup options—Storage menu
Storage
SATA Operation Configures operating mode of the integrated SATA hard drive controller.
Default: RAID On. SATA is configured to support RAID (Intel Rapid Restore
Technology).
Storage Interface
Port Enablement Enables the selected onboard drives.
● SATA-4
Default: ON
● M.2 PCIe SSD-0
Default: ON
● M.2 PCIe SSD-1
Default: ON
Drive Information Displays the information of various onboard drives.
Enable SMART Reporting Enables or disables Self-Monitoring, Analysis, and Reporting Technology
(SMART).
Default: OFF
Enable MediaCard Enables to switch all media cards On/Off or set the media card to read-only
state.
By default, Enable Secure Digital (SD) Card is selected.
System setup 27
To Next Page
Loading...
