Dell Precision Tower 3630 User Manual

4 To install the USB Type-C card:
a To remove the metal bracket as shown below, insert a athead screwdriver in the hole of the bracket [1], push the bracket to
release the bracket [2], and then lift the bracket out from the system.
b Insert the USB Type-C card into its slot from the inside of your computer [1] and fasten the two M3X3 screws to secure the
USB Type-C card to the system [2].
c Connect the USB Type-C card cable to the connector on the system board [3].
Installing the USB Type-C card
9

Dell Precision Tower 3630 Specifications

General

Processor Options	Intel Core i3, i5, i7, Xeon E-2100
Chipset	Intel C246 Chipset
Memory	Up to 64GB 2666MHz DDR4 ECC or non-ECC
Storage	Supports up to (4) 2.5 inch SATA
Graphics Options	NVIDIA Quadro and AMD Radeon Pro professional graphics
Operating System	Windows 10 Pro, Ubuntu
Power Supply	360W
Expansion Slots	1x full-height PCIe x16 Gen3, 1x full-height PCI
Ports	USB 3.1 Gen 1, HDMI, DisplayPort, RJ-45
Front Ports	USB 3.1 Gen 1 Type A (2), Universal Audio Jack
Rear Ports	2x USB 2.0, HDMI, DisplayPort, RJ-45, Audio Line-Out