Dell Precision Workstation 690 - Inside View; System Board Components

Inside View
System Board Components
13
serial
connector
Connect a serial device, such as a handheld device, to the serial port. If
necessary, the address for this port can be modified through system
setup (see System Setup).
1
power supply
2
hard drive bay
3
memory shroud

NOTICE: The memory shroud holds the (optional) memory riser cards in
place; its thumbscrews must be sufficiently tight in order to secure the
risers and to avoid damage.
4
front fan
5
card fan
6
5.25-inch drive bay with 3.5-inch drive panel plate
7
5.25-inch drive bay