About your monitor | 13
Power management modes
If you have VESA’s DPM-compliant video card or software installed on your computer, the
monitor can automatically reduce its power consumption when not in use. This is referred
to as power save mode
1
. If the computer detects input from the keyboard, mouse, or other
input devices, the monitor automatically resumes functioning. The following table shows the
power consumption and signaling of this automatic power saving feature.
VESA mode Horizontal
sync
Vertical
sync
Video Power indicator Power consumption
Normal
operation
Active Active Active White 130 W (maximum)
2
35 W (typical)
Active-off
mode
Inactive Inactive Off White
(Glowing)
Less than 0.5 W
Switch off - - - Off Less than 0.3 W
Energy Star Power consumption
P
ON
21.46 W
3
E
TEC
68.59 kWh
4
The OSD operates only in the normal operation mode. If you press any button in the active-
off mode, one of the following message is displayed.
1 Zero power consumption in OFF mode can only be achieved by disconnecting
the power cable from the monitor.
2 Adapter output maximum power consumption with maximum luminance.
3 Power consumption of on mode as defined in Energy Star 7.0 version.
4 Total energy consumption in kWh as defined in Energy Star 7.0 version.
This document is informational only and reflects laboratory performance. Your product
might perform differently, depending on the software, components, and peripherals you
ordered and shall have no obligation to update such information. Accordingly, you should not
rely upon this information in making decisions about electrical tolerances or otherwise. No
warranty as to accuracy or completeness is expressed or implied.
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR® compliant as defined in the program
requirements product specification for displays version 7.1.
To Next Page
Loading...
