EasyManuals Logo

Dell S2721DSB Disassembly Procedure

Dell S2721DSB
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
D
ELL
S
2721
D
S
B
1. Disassembly Procedures
S1
Turn off the monitor.
S2
Place the monitor on a soft cloth or
cushion.
Press and hold the stand release button
at the back of the display.
Lift the stand assembly up and away
from the monitor.
S3
Unlock 4 screws on Rear Cover
(Screw Torque: 8.5±1.0kgf)
S4
Follow the sequence to disassemble
Rear Cover from the monitor
S5
Tear off all adhesive tapes from
backlight wire and SPK wire
S6
Unlock 6 SPK screws
Pull out SPK wire from I/F BD
Disassemble SPK from Middle Frame
(Screw Torque: 4~6kgf)

Other manuals for Dell S2721DSB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell S2721DSB and is the answer not in the manual?

Dell S2721DSB Specifications

General IconGeneral
Screen Size27 inches
Resolution2560 x 1440 (QHD)
Panel TypeIPS
Refresh Rate75 Hz
Brightness350 cd/m²
Contrast Ratio1000:1
Aspect Ratio16:9
Built-in SpeakersYes (2 x 3W)
VESA MountYes (100 x 100 mm)
Color Support99% sRGB
Response Time4 ms (gray to gray)
Connectivity1 x HDMI, 1 x DisplayPort 1.2, 1 x USB 3.0 upstream, 1 x Audio line-out
Viewing Angle178° (horizontal), 178° (vertical)
AdjustabilityHeight, tilt, swivel

Related product manuals