USB cable
power cable
User’s manual
DP cable
Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
Use a Philips-head screwdriver to remove four
screws for unlocking mechanisms.
(No.1~4 screw size=M4x8; Torque=10~11kgfxcm)
Take out all accessories including QSG, user’s
manual, DP cable, USB cable, power cable and
other packing materials from the carton.(Note: It
depends on whether users returning the
accessories)
S2
Open the carton with a proper tool.
S1
Take out the monitor from EPE-bag and put the LCD
monitor on a protective cushion.
2
3
4
1
Take out the base and molded pulp from the carton.
S3
S4
S6
S5
S7
base
4
3
2
3
1
DELL S2721HGF
Lift the rear cover up carefully. Disconnect the
function key cable and power key cable from the
connectors of the interface board, and then remove
the rear cover.
monitor
stand
1. Disassembly Procedures:
1
To Next Page
Need help?
General
