Dell SE2219H - Teardown Instructions Manual

DELL SE2219H, SE2419H
1
1. Disassemble Procedures
S1
Turn off power
Unplug cables from monitor.
S4
Press upper edge of the back cover (start with top
of monitor) with both thumbs, the rest 4 fingers
pull back cover upwards. Repeat the action 2-8
position to remove back cover.
S2
Remove stand from monitor release button
(with Philip-head screwdriver)
S5
Remove 2 aluminium foil (#1 as yellow) and 2
acetate tape (#2 & #3 as green).
Remove Keypad cable & Backlight cable (#4 & #5
as blue).
Use Hexgonal screwdriver to remove 2 VGA
screws 4-40 x 11.8 (#6 & #7). Torque: 4.5 +/-
0.5Kgf.cm
Use Philips-head screwdriver (Φ5 mm) to remove
2 metal frame screws M3*5 (#8 & #9). Torque: 4.5
+/- 0.5Kgf.cm
S3
Use Philips-head screwdriver (Φ5 mm) to
remove 2 screws for unlocking.
M4 x 4.5, Torque = 12 +/- 1Kgf.cm
S6
Remove 1 aluminium foil & unplug LVDS cable.